Brain Trust Technologies LLC
TOLL FREE: (877) 288-5527
  • Home
  • Why Brain Trust
    • Partners & Certifications
    • Affiliations
  • Services & Solutions
    • Managed Services
    • Hosted Solutions
      • Business Solutions
    • Hardware & Software Sales
    • Professional Services
    • Business Continuity
  • Blog
  • Resources
    • White Papers
    • Brain Trust Reports
    • Case Studies
    • Newsletter Archive
  • About Us
    • Referral Program
    • Contact Us
  • Support

5 tips to maximize your mobile hotspot

April 26, 2018 admin Hardware 2018april26hardware_c, 4g, hotspot, internet, lte, mobile, router, wireless

Mobile hotspots are great for people who need to access the Internet even if they are somewhere without any Wi-Fi. All it takes is a portable 4G router. It offers a low-cost and readily available connection that your employees can utilize while working on the go.

A mobile hotspot usually provides faster Internet connection and better security compared with public Wi-Fi. But if this kind of mobile networking is not utilized well, it will accumulate expensive data charges. The following tricks will maximize the efficiency of mobile hotspots while lowering their data usage.

Place the router in a strategic spot
For your equipment to offer optimal coverage, put it in an area where it can best broadcast signals. The goal here is to cover as many devices as possible, so you want to carefully plan where the router is placed. Wireless signals reach only up to 100 feet indoors and 300 feet outdoors. The signals can pass through floors, walls and ceilings, but fewer obstructions will result in better transmission.

Less Wi-Fi range for longer battery life
If your settings allow, tweak your mobile wireless network for low-power, shorter Wi-Fi. Users must move closer to the hotspot for better Internet connection, but the router’s battery will thank you for it.

Check for LTE coverage
It’s a good idea to research the area you will use the portable router in. There are locations that do not support cellular 4G/LTE, which means you will still have Internet, but at slower speeds.

Watch out for background apps!
Laptops, tablets, and smartphones may be running applications in the background that are using up Internet bandwidth. The most common examples of these apps are location-based services, social media and email. Minimize the amount of data you use by disabling background apps you don’t need.

Avoid multimedia usage
Loading an email or text on a webpage with your mobile device will consume minimal amounts of data. Streaming videos or music will require more bandwidth, using up more data. Try to avoid using multimedia so your battery and data plan lasts longer.

Mobile hotspots let users remotely connect to the Internet without being dependent on possibly unsafe public Wi-Fi networks. With the ability to connect multiple devices to a single hotspot, these devices are an easy way to increase productivity.

We specialize in hardware solutions that improve your bottom line. Call us today for advice tailored to your business and its industry.

Published with permission from TechAdvisory.org. Source.

How connectivity impacts mobile workers

April 25, 2018 admin Business 2018april25business_c, gps, mobile performance management, performance analytics, troubleshooting, wifi

Mobile devices, such as smartphones and laptops, have changed the landscape of business organizations everywhere. Nowadays, businesses arm their workers with these devices in the field, making mobile performance and connectivity highly essential. Optimizing IT systems for mobile workers isn’t easy, but there are a few simple tricks you can try.

The ability to manage the workforce out in the field requires a modern support infrastructure called mobile performance management. It includes the top five tips to keep field workers connected: optimizing traffic, applying control, measuring performance analytics, simplifying data security, and identifying the root cause of connectivity issues.

Optimize

Although the latest apps on the market can maximize productivity for the mobile workforce, these apps come with a certain risks: stability issues that could lead to the apps crashing while out in the field. If you are your company’s IT decision-maker, be cautious of untested apps, and consider blocking heavy bandwidth apps to streamline data flow when signal strength is weak.

Control

Another thing you can do with mobile performance management solutions is blocking personal apps and unsafe WiFi networks. Both of these create serious security risks that could lead to costly data theft or loss.

Analyzing performance

Field workers mostly rely on GPS location data for more efficient scheduling, route-planning, and effective control of fuel consumption. This is possible only if there are reporting tools that confirm that the GPS capability is working. Performance analytics show you what mobile workers are experiencing, gaining access to robust data, network and app usage reports, inventory analysis, coverage maps and device maps as needed.

Simplify security

IT should tightly restrict access without making security complicated for mobile workers. IT administrators need to create a highly flexible and programmable secure mobile strategy. You must be able to restrict which apps can access company data and remotely wipe data from the device if it is lost or stolen.

Identifying the root cause of connection issues

Obviously, field workers are not IT experts, so organizations need to be fully prepared for connectivity issues involving their mobile devices. Organizations of all sizes should be able to afford remote diagnostics to gather complete troubleshooting information to allow IT to identify the root cause of the problem quickly, without relying on workers, who have no idea about how to run tests and answer questions regarding these issues.

For any organization with workers in the field, the ability to implement performance management structures and policies is a must. For other tips on how to keep your employees connected, engaged, and efficient, give us a call and we’ll be happy to advise.

Published with permission from TechAdvisory.org. Source.

What are watering hole attacks?

April 17, 2018 admin Security 2018april17security_c, cyberattack, intrusion prevention system, security, update, vpn, watering hole attack

When talking about cyberattacks, the first one that usually comes to mind is phishing, a scam that uses email to spread malware or steal personal information. But hackers have a new method to infiltrate your systems, and it’s surprisingly effective. Here’s what you need to know about watering hole attacks.

What are watering hole attacks?
Much like phishing, a watering hole attack is used to distribute malware onto victims’ computers. Cybercriminals infect popular websites with malware. If anyone visits the site, their computers will automatically be loaded with malware.

The malware used in these attacks usually collects the target’s personal information and sends it back to the hacker’s server. Sometimes the malware can even give hackers full access to their victims’ computers.

But how does a hacker choose which websites to hack? With internet tracking tools, hackers find out which websites companies and individual users visit the most. They then attempt to find vulnerabilities in those websites and embed them with malicious software.

Any website can fall victim to a watering hole attack. In fact, even high-profile websites like Twitter, Microsoft, Facebook, and Apple were compromised in 2013.

You can protect yourself by following these tips.

Update your software
Watering hole attacks often exploit bugs and vulnerabilities to infiltrate your computer, so by updating your software and browsers regularly, you can significantly reduce the risk of an attack. Make it a habit to check the software developer’s website for any security patches. Or better yet, hire a managed IT services provider to keep your system up to date.

Watch your network closely
To detect watering hole attacks, you must use network security tools. For example, intrusion prevention systems allow you to detect suspicious and malicious network activities. Meanwhile, bandwidth management software will enable you to observe user behavior and detect abnormalities that could indicate an attack, such as large transfers of information or a high number of downloads.

Hide your online activities
Cybercriminals can create more effective watering hole attacks if they compromise websites only you and your employees frequent. As such, you should hide your online activities with a VPN and your browser’s private browsing feature.

At the end of the day, the best protection is staying informed. As cyberthreats continue to evolve, you must always be vigilant and aware of the newest threats. Tune in to our blog to find out about the latest developments in security and to get more tips on how to keep your business safe.

Published with permission from TechAdvisory.org. Source.

How to speed up mobile charging

April 11, 2018 admin Hardware 2018april11hardware_c, android, battery, fast charging, iphone, mobile charging

Is your phone’s battery still not full despite charging it for 2 hours straight? Although it might not be a big problem when you’re charging it at night, it’s a critical issue if you’re charging it during the day and you need it in a few minutes to make a lengthy business call. Here are four tips to speed up your phone’s charging.

#1. Optimize your phone accessories

One reason why your phone charges slowly is because of poor-quality accessories — such as cables, adapters, and weak sources of electricity.

Cables and adapters

Unless you were careful to take great care of your phone cable and adapter, they might be the reason why your phone is charging so slowly. If you think this could be the problem, we recommend that you change them immediately. After doing so, make sure to use and store your new cable and adapter properly to keep them in tip-top shape.

Charging Source

Did you know that your phone will charge faster if you connect it to a higher amperage charging source? Although mobile phones charge at only 5 volts, depending on the charger you use, you can get amperage from as low as 500mA (milliamps) to as high as 2,100mA. Therefore, it is recommended to forgo charging your mobile device through a computer port (uses 500mA or 900mA) and use a wall charger (ranges from 500-2,100mA) instead.

#2. Clean your phone’s charging port

Another reason why you may experience slower charging time is because of a corroded or obstructed port. If the problem is because of obstruction, get a flashlight, magnifying glass, toothpick, and small brush to completely remove any debris. However, you should be very careful when doing this because the port is very fragile.

We recommend you enlist a professional’s help to clean your port if you’re worried about damaging it or if the problem is due to corrosion.

#3. Background apps

When was the last time you sorted out your phone’s background apps? If you don’t remember, then it’s time to do it! Apps that are opened and left running in the background not only drain your phone’s battery, but also affect your phone’s charging speed. Select “Battery” in your phone’s Settings to find out which apps are using up your phone’s power, and delete them if necessary.

#4. Using your phone while charging

Do you browse the internet while your phone is charging? If yes, then you should stop doing it. Feature-rich apps like WhatsApp and Facebook have been listed as two of the top ten battery draining apps by AVG, which means you may be slowing down your phone’s charging speed when you use them while it charges.

Every successful business needs high-performance mobile phones, but this is only possible if their batteries are juiced. If you want more information about how to speed up charging your phone, contact our experts today.

Published with permission from TechAdvisory.org. Source.

Non-financial blockchain solutions

April 10, 2018 admin Business 2018april10business_c, agriculture, bitcoin, blockchain, business value, decentralized, law, real estate, security

Despite internet connections that deliver information to the other side of the globe in milliseconds, countless industries still rely on slow and inefficient middlemen to complete transactions. From supply chain management to hi-tech contracts, blockchain isn’t just about money, it’s about an entirely new way to do business. Just look at our examples.

What is blockchain?

Blockchain, like the cloud, is more of a concept than a specific piece of software or hardware. It’s the idea that if you store a spreadsheet or ledger on a hundred different computers — each of which receive automatic and encrypted updates — it’s nearly impossible to create a fraudulent entry. If someone adds a line of false information to one spreadsheet, 99 others can confirm it is not in their copy and is therefore inaccurate.

In the Bitcoin ledger, each line represents the transfer of funds from one account to another. So if John wants to transfer money to Jane, he sends a request to Bitcoin’s blockchain and thousands of computers confirm his account information is correct and he has sufficient funds. The money is transferred, both account balances are updated, and the whole process takes less than an hour with almost no human interaction. Much faster than the 5-7 business days of most banks.

There are countless applications for decentralized, real-time record keeping beyond financial transactions, though. And very soon, blockchain won’t be synonymous with Bitcoin.

Blockchain’s potential

Although this technology has been around since the ’90s, it lacked the popularity and computing power necessary to become a mainstream solution…until now. With the rise of cryptocurrencies in 2017, blockchain started seeping into other industries, such as:

  • Law – “Smart contracts” create agreements that automatically execute when their terms are met. For example, an attorney could agree to pay a courier $100 after the delivery of documents to the defendant in a case. The contract and the payment sit in the blockchain until the courier uploads a GPS-tagged photo of services rendered, at which point the money is transferred and the contract archived.
  • Agriculture – Supply chain blockchains can track every ingredient throughout the production process. If several people get sick from the same food item, ingredients could be traced back to their source and products that share the same ingredients could be recalled preemptively.
  • Real estate – Blockchain is being used to automate escrow account transactions, property title transfers, and insurance claims, so they aren’t reliant on slow and error-prone humans. Buying a home could eventually be as easy as finding the one you want, signing a contract, transferring your down payment, and receiving the title — no middleman necessary.

Most blockchain-based solutions are too new to trust with sensitive information. But you can do a few things to get out in front of your competitors. You can work with us to invest in business intelligence software that helps you collect more data, and start experimenting with risk-free blockchain solutions.

As long as you have certified technicians like ours at your disposal, you’ll be sure to see gains in no time — give us a call today!

Published with permission from TechAdvisory.org. Source.

Protect your Facebook data with these 3 steps

April 9, 2018 admin Social Media 2018april9socialmedia_c, data, facebook, information, privacy, protection, security, social media

Facebook users woke up to a nightmare when they heard that the social media giant and associated app developers were selling their sensitive data to companies, like Cambridge Analytica, without their consent. So if you’re concerned about being one of the 50 million users whose data have already been sold, you should check out the following 3 tips.

Download your Facebook data

The thought of a complete stranger going through your account is pretty disturbing. Yet, you’re probably curious about the amount of information you uploaded to your social media sites over the years. Fortunately, Facebook allows you to download a copy of all your data. You simply have to log in to its web version and…

  • On the site’s main navigation, click on the down button right next to the Quick Help icon
  • A menu will pop up and you’ll find Settings right above the Log Out option
  • Click on Settings and you’ll automatically be redirected to General
  • Within the General page, press Download a copy of your Facebook Data
  • It will redirect you to a different page where you’ll need to press Start My Archive button to proceed with the download process

Once that’s done, you’ll be able to see an archive of all your Facebook activity, such as the statuses you’ve posted, messages you’ve sent, and ads you’ve clicked on.

Change your privacy settings

After going through all your data, you might realize that everything you shared is harmless. But, that doesn’t mean it won’t end up in the hands of cybercriminals who can use it against you.

We suggest going back to the Settings page and clicking on Privacy. That’s where you can modify whether you want your posts to be seen by the public or only by your friends. You can even control who’s allowed to send you friend requests, view your friends list, and most importantly, decide whether search engines are allowed to link to your profile.

Check or delete apps

You know those personality quizzes that you and your friends always had a ball answering? Apparently, Cambridge Analytica gathered all the responses from one of those app developers. Luckily, you can stop them from further accessing your profile. In Settings, click on Apps to see all the apps linked to your profile. Beside each one, you can choose Edit Settings to review its authorizations or click Remove to completely get rid of it.

Your recent love-hate relationship with Facebook has you second-guessing. If you want to take data security up a notch, we can always provide more tips and tools, and even assess your current level of security. Just give us a call and we’ll take care of your privacy so you don’t wind up breaking up with your favorite social media site.

Published with permission from TechAdvisory.org. Source.

Recent Posts

  • Can AI empower customer service agents?
  • Leave no room for hackers to operate
  • Keep your laptop from overheating

Recent Comments

    Archives

    • May 2018
    • April 2018
    • March 2018
    • February 2018
    • January 2018
    • December 2017
    • November 2017
    • October 2017
    • September 2017
    • August 2017
    • July 2017
    • June 2017
    • May 2017
    • April 2017
    • March 2017
    • February 2017
    • January 2017
    • December 2016
    • November 2016
    • October 2016
    • September 2016
    • August 2016
    • July 2016
    • June 2016
    • May 2016
    • April 2016
    • March 2016
    • February 2016
    • January 2016
    • December 2015
    • November 2015
    Brain Trust Technologies LLC

    6749 S. Westnedge Ave
    Suite K, #128
    Portage, MI 49002-3556

    Southwest Michigan: (269) 290-7137
    St. Louis: (314) 558-0623
    Toll Free: (877) 288-5527

    SMS Terms of Service | SMS Privacy Policy

    © 2025 Brain Trust Technologies, LLC. All Rights Reserved